My garage
Categories
Suitable for Scania 93, 113, 143 G/P/R/T
For the Scania 93, 113, 143 G/P/R/T, the manufacturer specifies motor oil 10W-40 (ACEA A3/B3, ACEA A3/B4, ACEA E11), 15W-40 (ACEA A3/B4, ACEA E11, ACEA E7), or 5W-30 (Scania LDF-3, Scania LDF-4, ACEA E11). All 3 engine variants of the Scania 93, 113, 143 G/P/R/T take the same oils, so the selection below applies to every one of them.
Fill quantity and viscosity by engine of the Scania 93, 113, 143 G/P/R/T
| Engine | Model years | Viscosity | Fill quantity |
|---|---|---|---|
| 113 | 1988–1995 | 10W-40, 15W-40, 5W-30 | 25 L |
| 143 | 1988–1995 | 10W-40, 15W-40, 5W-30 | 25 L |
| 93 | 1988–1995 | 10W-40, 15W-40, 5W-30 | 27 L |
Fill quantity including an oil filter change, taken from our vehicle data. The change interval is set by your service book, not by the oil.
Other fluids for the Scania 93, 113, 143 G/P/R/T
| Fluid | Requirement |
|---|---|
| Manual gearbox & axle oil | 75W-140, 75W-90, Scania STO 2:0A FS, API GL4 |
| Automatic transmission fluid (ATF) | 75W-140, 75W-90, Scania STO 2:0A FS, Allison TES 389 |
| Gear oil | 75W-140, 75W-90, Scania STO 2:0A FS, API GL4 |
| Axle & differential oil | 75W-140, 75W-90, Scania STO 2:0A FS, Allison TES 389 |
| Brake fluid | DOT 3, FMVSS 116 DOT 3 |
| Coolant & antifreeze | G11, G12 |
| Power steering fluid | Allison TES 389, Caterpillar TO-2 |
| Greases & lubricants | Müller-Weingarten, Schmieröl DIN 51517 CLP 150 |
Which viscosity does a Scania 93, 113, 143 G/P/R/T need?
We cover 3 engine variants of the Scania 93, 113, 143 G/P/R/T. The most commonly approved grades are 10W-40, 15W-40 and 5W-30. Fill quantity ranges from 25.0 to 27.0 litres depending on the engine.
Which approvals does Scania require?
Scania mostly calls for the approvals Scania LDF-3 and Scania LDF-4. An oil without the right approval can cost you a warranty claim.
Scania 93, 113, 143 G/P/R/T engine variants
The oil finder covers these engine variants of the Scania 93, 113, 143 G/P/R/T: 113 1988–1995, 143 1988–1995 and 93 1988–1995.
